Description
- Tap & Die Specifications：Tap: Thread Size: M12 x 1.25 (RH); Square Shank Width: 7mm / 0.28"; Thread Length: 32mm / 1.26"; Total Length: 78mm / 3.07"; Accuracy Class: H2. Die: Thread Size: M12 x 1.25 (RH); Outside Diameter: 38mm / 1.5"; Thickness: 10mm / 0.39".
- Features：Straight flute taps allow for fast downward chip removal for efficient threading, and debris can be quickly discharged into the groove. No clogging and high efficiency. Round Die have conical locking holes, strong locking force, will not loosen.
- Easy to Use：Works with standard tap wrench and die stock (not included). Apply lubricant to reduce friction and extend tool life. Maintain alignment and steady pressure for clean, precise threads.
- Wide Applications：The metric tap and die set can re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
- Note：Ensure proper alignment, use correct tapping technique, and balance the operator's force with both hands. Do not apply excessive force and sway from side to side, as this may tear the threaded tooth pattern and cause the threaded hole to expand and taper.
