Independent UK tool guide · Prices checked daily · Checkout and delivery by Amazon UK
UK Tool Store
Buying guides Price drops About

Broaching Cutters

Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.

Price drops Buying guides Bare tool vs kit Battery guide

Showing 1–20 of 99 results

Choosing a keyway broach set
Push broaching is the quickest way to cut an accurate internal key slot in a pulley, gear or sprocket bore without milling machines or a slotting head. The cutter is pushed through the bore in an arbor press, guided by a collared bush, and each tooth takes a fine cut.
What comes in the sets
Most sets and kits contain several cutters, collared guides to suit common bore sizes, and shims that raise the cutter for each pass. Style A and style B cutters suit narrow slots, with style C and style D for wider ones. Imperial and millimetre sets are both sold, so match the style and size to your shafts and keys. A small style A cutter suits shafts from a few millimetres upwards. Other broaches cut squares and hexagons for socket and drive work.
How to use them

Fit the guide in the bore and seat the cutter in its slot.
Press it through in one smooth stroke, keeping the ram square to the base.
Add a shim and repeat until the slot reaches the correct height.
Use cutting oil and clear swarf from the teeth after every pass.

Broaching or milling?
For one off jobs in soft steel, brass and aluminium, a hand press and broach is faster than setting up milling. On a milling machine, a slotting holder or rotary broach holder can cut blind slots and squares, and an index head helps with multiple slots. Hardened parts need a carbide insert in a holder on lathes, milling machines or CNC machines instead, as carbide copes with the heat and hardness. Lathes can also cut slots with a slotting tool in the toolpost, but it is slow.
Store the cutters in their foam block or fitted case so the teeth do not contact each other or a steel bench block, and view the products above for sizes. For other metalworking accessories, see our drill bits guide or browse the full power tool accessories range.
Keyway broach FAQs
Do I need a press? Yes. An arbor, screw or hydraulic press gives the steady push needed. Hammering ruins the cutter and the finish.
Can I cut blind slots? Not with a push broach, which must pass right through. Use milling or a rotary broach holder for blind work; a screw press will not help there.