Cordless Soldering Iron Kit with LED Light, Rechargeable Battery, 8W Welding Tool, Adjustable Temp 300-450°C, Fast Heating, Portable

Description

• Please remove the protective cap carefully to avoid loosening the tip due to twisting. Do not place the heat-sensitive cap on a hot soldering iron. Powered by a 2600mAh rechargeable battery, this iron offers three modes: Green (300–350°C, ~120 min), Blue (350–380°C, ~90 min), and Red (400–450°C, ~60 min). Usage time may vary. Using beyond 120 min in Green mode may drain the battery and prevent mode switching. Includes 3 tips (1 pre-installed); extra B18650 tips are available in our store.
• The 2600mAh battery (18650, standard size) provides different runtimes based on temperature mode: Green (300–350°C, 1.3A, ~2 hrs), Blue (350–380°C, 1.73A, ~1.5 hrs), and Red (400–450°C, 2.6A, ~1 hr). Actual runtime may vary due to task complexity, lower temps, or battery aging. For extended or high-power use, keep a spare battery on hand to avoid full drain. If depleted, remove the battery and continue using the iron via Type-C cable. Avoid using the iron while charging to extend battery life.
• To charge the battery, first ensure correct polarity—do not insert the battery backwards. Connect the Type-C charging cable; a faint red light will appear. Do not long-press the "O" button—leave the device idle while charging. After ~4 hours, the light turns green, indicating a full charge. The iron stays cool during charging. A red light may still show when reconnecting the cable—this does not mean the battery isn't full. Unplug to begin use. For questions, contact support with video or text.
• When no battery is installed, the iron can be powered via a Type-C cable. A faint red light indicates standby (not heating). In Type-C mode, hold the “O” button for 5 seconds to heat—light turns green. Press again to switch to blue, then red, and once more to return to standby (faint red). It works while plugged in, though less portable—use a power bank if needed. When using a battery, ensure correct polarity. In battery mode, the same button cycle applies. Slight runtime variation is normal.
• Safety Tips for Cordless Soldering Iron: In battery or Type-C mode, the built-in LED turns on automatically, providing light for low-light tasks like electronics repair. The tip is sharp—allow it to cool before attaching the cap. Wear protective gear and ensure proper ventilation. Place the iron securely, away from flammable materials, children, and pets. Follow voltage guidelines, remove the battery when unused, clean the tip regularly, and replace if worn. Contact HANDSKIT support if needed.