Carpet Gripper Rods Pack of 16 Pcs Covering 39.90ft (12.16m) – Carpet Grippers 2.49ft (76cm) Long, Pre-Nailed Strips with Dual Purpose Pins for Underlay Flooring – Stairs, Concrete, Wood Floors

Description

• PRE-NAILED WOOD STRIPS: These carpet gripper rods are made from high-quality plywood and come pre-nailed with dual-purpose pins, with pins protruding 0.48 mm for optimal grip.Ideal for DIY enthusiasts and professionals alike. The durable plywood material ensures long-lasting performance and prevents warping, delivering a professional carpet finish every time.
• PERFECT DIMENSIONS FOR ANY ROOM: Each gripper rod measures 2.49 ft (76 cm) in length, 0.79 in (2 cm) in width, and 0.6 mm in thickness, making them ideal for seamless installation in various spaces. A pack of 16 wood strips covers a total length of 39.90 ft (12.16 m). To determine the number of carpet gripper strips required, simply measure your room's perimeter and calculate the total length needed for your project.
• SUITABLE FOR WOODEN AND CONCRETE FLOORS: These carpet grippers work perfectly on both wooden and concrete subfloors. Secure them using a hammer, adhesive, or masonry nails for a fast and hassle-free installation. These plywood grippers are perfect for living rooms, bedrooms, or stairs.
• CUT GRIPPERS TO FIT – If needed, cut the gripper rods to size using a saw to fit corners or irregular spaces. Wear protective gloves to handle the sharp pins on the rods. Once the grippers are installed, lay the carpet underlay between the gripper rods, covering the floor but not overlapping the grippers.
• INSTALLATION GUIDANCE – Place the carpet gripper rods about 7-8mm (1/4 inch) from the skirting board or wall across the perimeter. This gap allows room for the carpet edge to tuck in. The angled pins should face toward the wall, as they grip the carpet backing when stretched over them. Do Not Place Grippers in Doorways!