Router Cutters
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Trend Guided Rounded Over Router Cutter, 1/2 Inch Shank, 6.3mm Radius
£33.60 -
Trend Intumescent Recessing Router Cutter, 1/2 Inch Shank, 40mm Cut
£36.95 -
Trend Pocket Cutter, 4.8mm Diameter, 1/4 Inch Shank, 19mm Cut Length
£10.90 -
Trend Professional Bearing Guided Trimming Cutter, 1/4 Inch Shank, 12.7mm Cut Diameter, 25mm Cut, 1/2 Inch Bearing, Tungsten Carbide Tipped, T46/01X1/4TC
£26.49 -
Trend Professional Rota-Tip Single Blade Straight Router Cutter, 1/2 Inch Shank, 12.7mm Cut Diameter & 49.5mm Cut Length, RT/13X1/2TC
£83.50 -
Trend Professional Straight Two Flute Router Cutter, 1/4 Inch Shank, 20mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, 4/6X1/4TC
£37.62 -
Trend Professional Worktop Router Cutter Set, 1/2 Inch Shank, 12.7mm Cut Diameter & 50mm Cut Length, Tungsten Carbide Tipped, 3 Pack in Case, KFP/1, Black
£63.00 -
Trend Slat Wall Router Cutter, 1/2 Inch Shank, 30mm Cut Diameter
£62.60 -
Trend Slotting Router Cutter, 1/4 Inch Shank, 10mm Cutting Depth
£27.40 -
Trend Straight Two Flute Router Cutter, 1/2 Inch Shank, TCT, 19.1mm
£21.83 -
Trend Straight Two Flute Router Cutter, 1/4 in Shank, 12mm Diameter
Original price was: £20.99.£10.95Current price is: £10.95. -
Trend Straight Two Flute Worktop Router Cutter, 1/2 Inch Shank, 12.7mm Cut Diameter & 50.8mm Cut Length, Tungsten Carbide Tipped, BR01X1/2TC
£12.95 -
Trend Trade Guided Profiler, 1/4 Inch Shank, 12.7mm Cut Diameter & 25.4mm Cut Length, Tungsten Carbide Tipped, TR29X1/4TC
Original price was: £40.84.£28.10Current price is: £28.10. -
Trend Tungsten Carbide Chamfer Router Cutter, 1/4 Inch Shank, 30.9mm Cut
£37.70 -
Trend Tungsten Carbide Tipped Guided Trimmer 1/4 Inch Shank 6.3mm Cut Dia
Original price was: £21.35.£13.95Current price is: £13.95. -
Trend Weatherseal Groover Router Cutter, 1/4 in Shank, Bearing Guided TCT
£44.41 -
Trvoxviq Spiral Router Bits CNC End Mill, 6mm Shank Up Down Cut Compression Bit with DLC Coating, Durable Tungsten Steel CNC Bits Milling Cutter Tools for Woodworking Engraving Grooving(6x25mm, 2PCS)
£29.99 -
WSOOX 1/4 Inch Shank Straight Router Bit Set, 7 pcs Straight Milling Cutter Woodworking Slotting Router Bits
£16.99 -
YINETTECH 1/4 Inch Shank Guided Profiler Router Cutter Bit Straight Two Flute Router Cutter Bit for Compostion Materials MDF Solid Wood, 9.5mm Cut Diameter/ 6.35mm Cut Length
£10.89 -
Yonico 14911q 1/4-Inch x 1/4-Inch Top Bearing Slot Cutter Router Bit 1/4-Inch Shank
Original price was: £15.95.£14.12Current price is: £14.12.
Choosing router cutters for joinery and trim work
Whether you are fitting kitchens, hanging fire doors or making furniture in a home workshop, the bit in the collet decides the finish. A sharp, well matched profile leaves a clean edge right off the machine. A blunt or wrong one burns, chatters and tears out. Here is how to pick the right bits without filling a drawer with ones you never use.
Common profiles and what they are for
Straight and spiral bits: housings, grooves, rebates and mortices. Spiral up-cut types clear chips and dust well, down-cut types leave a crisp top face on veneered board.
Bearing guided trimmers: flush trimming laminate, edging and template or pattern work.
Rounding over, chamfer and ovolo: softening and decorating an edge on solid timber and MDF.
Dovetail and joint bits: drawer boxes, finger joints and lock mitre joints for strong carcass work.
Raised panel and stile and rail sets: cabinet doors with a matching frame and a raised panel, usually best on a table. Stile and rail profiles must be run as a matched pair so the joint closes tight.
Specialist profiles: intumescent recessing for fire door strips, weatherseal grooving for window and door frames, and finger pull profiles for handleless kitchens.
V-groove and carving bits: lettering, sign carving and decorative panel work, where a saw blade simply cannot follow the line.
1/4 inch, 1/2 inch or 8mm?
Match the bit to your collet. Palm and cordless trimmers usually take 1/4 inch or 6mm or 8mm metric, so check before you order a metric profile for an imperial collet. Full size plunge models often accept 1/2 inch, which is stiffer, vibrates less and is the safer choice for large raised panel and worktop bits. Never run a bit in an adaptor or a collet it does not exactly fit.
TCT, solid carbide or PCD
TCT bits are the standard for timber, ply and MDF, and many pro grade ones can be resharpened. Solid carbide suits small diameters, acrylics and spiral designs. PCD (diamond) tipped bits cost far more but last many times longer in abrasive stock such as chipboard and solid surface worktops, so they make sense for trade kitchen fitters.
Sets or single bits?
Starter sets are a cheap way to try profiles, but quality varies. Most joiners buy a few quality groovers, a flush trimmer and a rounding over bit first, then add specialist profiles as jobs need them. Keep them in a storage box with each bit in its own slot so edges do not chip against each other.
Routing safely
Take several shallow passes rather than one deep one, feed against the rotation, clamp the work, and use dust extraction. Keep hand and fingers well away from the bit, and wear eye and hearing protection. Our router bits for joinery guide goes deeper on profiles, and professional woodworking power tools covers the machines themselves.
Router cutter FAQs
Can I use 1/2 inch bits in a 1/4 inch machine?No. Bits must match the collet exactly. Some larger models come with 1/4 inch, 8mm and 1/2 inch collets, so check what your machine accepts.
How do I know when a bit is blunt?Burning, a fuzzy finish, more effort to feed and more noise are the usual signs. Clean off resin first, as build-up often mimics a dull edge.
Find more consumables in power tool accessories.



















