Router Cutters
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Trend CraftPro Guided Profiler Router Cutter Bit, 1/4 Inch Shank, 9.5mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C121PX1/4TC
£56.98 -
Trend CraftPro Intumescent Recessing Router Cutter, 1/4 in Shank, 24mm
£37.99 -
Trend CraftPro Kitchen Fitter Worktop Router Cutter Bit, 1/2 Inch Shank, 12.7mm Cut Diameter & 50mm Cut Length, Pack of 5, Tungsten Carbide Tipped, CR/KFP/5
£80.10 -
Trend CraftPro Ovolo Rounded Over Router Cutter, 1/4 Inch Shank, 4.8mm Radius and 22.2mm Cut Length, Tungsten Carbide Tipped, C128X1/4TC
£23.30 -
Trend CraftPro Self Guided Trimmer Router Cutter Bit, 1/2 Inch Shank, 12.7mm Cut Diameter & 50mm Cut Length, Tungsten Carbide Tipped, C195X1/2TC, Silver
£25.50 -
Trend CraftPro Self-Guided Trimmer Router Cutter Bit, 1/2 Inch Shank, 12.7mm Cut Diameter & 25.4mm Cut Length, Tungsten Carbide Tipped, C116X1/2TC
£19.60 -
Trend CraftPro Self-Guided Trimmer Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 25.4mm Cut Length, Tungsten Carbide Tipped, C116X1/4TC
Original price was: £28.16.£21.99Current price is: £21.99. -
Trend CraftPro Slotting Router Cutter 1/4 In Shank, Tungsten Carbide Tipped
£27.40 -
Trend CraftPro Slotting Router Cutter, 1/4 Inch Shank, 2mm Kerf, 31.8mm Diameter, Tungsten Carbide Tipped, C143BX1/4TC
£23.15 -
Trend CraftPro Straight Flute Two Flute Router Cutter, 1/2 Inch Shank with 12.7mm Cut Diameter and 50mm Cut Length, Carbide Tipped, C153X1/2TC
Original price was: £17.90.£16.99Current price is: £16.99. -
Trend CraftPro Straight Two Flute Router Cutter Bit, 1/2 Inch Shank, 12.7mm Cut Diameter & 50mm Cut Length, Tungsten Carbide Tipped, C153SX1/2TC
£19.40 -
Trend CraftPro Straight Two Flute Router Cutter Bit, 1/2 Inch Shank, 6.3mm Cut Diameter & 25.4mm Cut Length, Tungsten Carbide Tipped, C008X1/2TC
£13.00 -
Trend CraftPro Straight Two Flute Router Cutter Bit, 1/4 Inch Shank, 12mm Cut Diameter & 19mm Cut Length, Tungsten Carbide Tipped, C019AX1/4TC, Silver
£16.95 -
Trend CraftPro Straight Two Flute Router Cutter, 1/2 Inch Shank, 25.4mm Cut Diameter, 19.1mm Cut Length, Tungsten Carbide Tipped, C033X1/2TC
£21.20 -
Trend CraftPro Two Flute Chamfer Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide, Tipped, C044X1/4TC
Original price was: £24.96.£17.40Current price is: £17.40. -
Trend CraftPro Two Flute Intumescent Recessing Cutter, 1/2 Inch Shank
£45.95 -
Trend CraftPro Two Flute Intumescent Recessing Router Cutter Bit, 1/4 Inch Shank, 24mm Cut Diameter & 10mm Cut Length, Tungsten Carbide Tipped, C209X1/4TC
£31.49 -
Trend CraftPro Weatherseal Groover Router Cutter Bit, 1/4 Inch Shank, 34mm Cut Diameter & 2mm Cut Length, Tungsten Carbide Tipped, Bearing Guided, C210AX1/4TC
£42.10 -
Trend CraftPro Weatherseal Groover Router Cutter Bit, 1/4 Inch Shank, 34mm Cut Diameter & 3mm Cut Length, Tungsten Carbide Tipped, Bearing Guided, C213AX1/4TC
£48.95 -
Trend Drawer Pull Router Cutter, 1/4 Inch Shank, 19mm Cut, Carbide Tipped
£83.09
Choosing router cutters for joinery and trim work
Whether you are fitting kitchens, hanging fire doors or making furniture in a home workshop, the bit in the collet decides the finish. A sharp, well matched profile leaves a clean edge right off the machine. A blunt or wrong one burns, chatters and tears out. Here is how to pick the right bits without filling a drawer with ones you never use.
Common profiles and what they are for
Straight and spiral bits: housings, grooves, rebates and mortices. Spiral up-cut types clear chips and dust well, down-cut types leave a crisp top face on veneered board.
Bearing guided trimmers: flush trimming laminate, edging and template or pattern work.
Rounding over, chamfer and ovolo: softening and decorating an edge on solid timber and MDF.
Dovetail and joint bits: drawer boxes, finger joints and lock mitre joints for strong carcass work.
Raised panel and stile and rail sets: cabinet doors with a matching frame and a raised panel, usually best on a table. Stile and rail profiles must be run as a matched pair so the joint closes tight.
Specialist profiles: intumescent recessing for fire door strips, weatherseal grooving for window and door frames, and finger pull profiles for handleless kitchens.
V-groove and carving bits: lettering, sign carving and decorative panel work, where a saw blade simply cannot follow the line.
1/4 inch, 1/2 inch or 8mm?
Match the bit to your collet. Palm and cordless trimmers usually take 1/4 inch or 6mm or 8mm metric, so check before you order a metric profile for an imperial collet. Full size plunge models often accept 1/2 inch, which is stiffer, vibrates less and is the safer choice for large raised panel and worktop bits. Never run a bit in an adaptor or a collet it does not exactly fit.
TCT, solid carbide or PCD
TCT bits are the standard for timber, ply and MDF, and many pro grade ones can be resharpened. Solid carbide suits small diameters, acrylics and spiral designs. PCD (diamond) tipped bits cost far more but last many times longer in abrasive stock such as chipboard and solid surface worktops, so they make sense for trade kitchen fitters.
Sets or single bits?
Starter sets are a cheap way to try profiles, but quality varies. Most joiners buy a few quality groovers, a flush trimmer and a rounding over bit first, then add specialist profiles as jobs need them. Keep them in a storage box with each bit in its own slot so edges do not chip against each other.
Routing safely
Take several shallow passes rather than one deep one, feed against the rotation, clamp the work, and use dust extraction. Keep hand and fingers well away from the bit, and wear eye and hearing protection. Our router bits for joinery guide goes deeper on profiles, and professional woodworking power tools covers the machines themselves.
Router cutter FAQs
Can I use 1/2 inch bits in a 1/4 inch machine?No. Bits must match the collet exactly. Some larger models come with 1/4 inch, 8mm and 1/2 inch collets, so check what your machine accepts.
How do I know when a bit is blunt?Burning, a fuzzy finish, more effort to feed and more noise are the usual signs. Clean off resin first, as build-up often mimics a dull edge.
Find more consumables in power tool accessories.



















