Router Cutters
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Straight Router Cutter Bit, 8mm Cutting Diameter Router Bits 30mm Cut Length 6mm Shank Top Bearing Pattern Flush Trim Bits Straight Router Bit Milling Cutter Tool Carbide for Woodworking Trimming
£6.05 -
T Slot Router Bit 1/4" Shank 2mm Slot Cutter Bit For Knock On furniture Campervan Motorhome
£6.97 -
T Slot Router Bit, 1/4" Shank 2mm Slot Cutter Routers Bit, Biscuit Jointer Router with Tungsten steel Hand Held Shank, Joint Slot Cutter for Furniture Campervan Motorhome
£7.59 -
Top Bearing Slot Cutter Router Bit, 1/4" Shank, Carbide-Tipped, 3/16"Depth.
£11.99 -
Trend 12 Piece Router Cutter Starter Set, 1/4 Inch Shank, Tungsten Carbide Tipped, Storage Case Included, SET/SS8X1/4TC, packaging may vary
£30.14 -
Trend 15 Piece Router Cutter Starter Set, 1/2 Inch Shank, Tungsten Carbide Tipped, Storage Case Included, SET/SS9X1/2TC
Original price was: £31.94.£29.99Current price is: £29.99. -
Trend 24 Piece Router Bit Starter Set, 1/4 Inch Shank, Carbide Tipped
£48.70 -
Trend 45 Degree Miniature Chamfer Router Cutter, 1/4 Inch Shank
£26.99 -
Trend Acrylic Spiral Up-Cut Router Cutter, 1/4 Inch Shank, 4mm Cut
£47.50 -
Trend Aluminium Cutter, 8mm Shank, 8mm Cut Diameter, 14mm Cut Length
Original price was: £19.99.£18.95Current price is: £18.95. -
Trend Bearing Guided Round Over Router Cutter, 1/4 Inch Shank, 1.6mm Radius
£27.40 -
Trend Bearing Guided Round Over Router Cutter, 1/4 Inch Shank, 9.5mm Radius
£41.99 -
Trend Bearing Guided Trimmer Router Cutter, 1/2 Inch Shank, 12.7mm
£23.30 -
Trend CraftPro Bearing Guided Three Flute Trimmer Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C205X1/4TC
Original price was: £22.99.£21.20Current price is: £21.20. -
Trend CraftPro Cavetto Router Cutter Bit, 1/2 Inch Shank, 9.5mm Radius and 80mm Cut Diameter, Tungsten Carbide Tipped, C056AX1/2TC
Original price was: £34.99.£33.95Current price is: £33.95. -
Trend CraftPro Corner Bead Router Cutter, 1/4 Inch Shank, 22.3mm Cut Diameter & 14mm Cut Length, 3.2mm Radius, Tungsten Carbide Tipped, C140X1/4TC
£40.40 -
Trend CraftPro Dovetail Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 104 Degree Spur, Tungsten Carbide Tipped, C041AX1/4TC
£17.90 -
Trend CraftPro Dovetail Router Cutter, 1/4 Inch Shank, 12.7mm, TCT
£17.90 -
Trend CraftPro Guided Profiler Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C121X1/4TC
Original price was: £29.87.£24.59Current price is: £24.59. -
Trend CraftPro Guided Profiler Router Cutter Bit, 1/4 Inch Shank, 4mm Cut Diameter & 12.7mm Cut Length, Tungsten Carbide Tipped, C121KX1/4TC
£14.65
Choosing router cutters for joinery and trim work
Whether you are fitting kitchens, hanging fire doors or making furniture in a home workshop, the bit in the collet decides the finish. A sharp, well matched profile leaves a clean edge right off the machine. A blunt or wrong one burns, chatters and tears out. Here is how to pick the right bits without filling a drawer with ones you never use.
Common profiles and what they are for
Straight and spiral bits: housings, grooves, rebates and mortices. Spiral up-cut types clear chips and dust well, down-cut types leave a crisp top face on veneered board.
Bearing guided trimmers: flush trimming laminate, edging and template or pattern work.
Rounding over, chamfer and ovolo: softening and decorating an edge on solid timber and MDF.
Dovetail and joint bits: drawer boxes, finger joints and lock mitre joints for strong carcass work.
Raised panel and stile and rail sets: cabinet doors with a matching frame and a raised panel, usually best on a table. Stile and rail profiles must be run as a matched pair so the joint closes tight.
Specialist profiles: intumescent recessing for fire door strips, weatherseal grooving for window and door frames, and finger pull profiles for handleless kitchens.
V-groove and carving bits: lettering, sign carving and decorative panel work, where a saw blade simply cannot follow the line.
1/4 inch, 1/2 inch or 8mm?
Match the bit to your collet. Palm and cordless trimmers usually take 1/4 inch or 6mm or 8mm metric, so check before you order a metric profile for an imperial collet. Full size plunge models often accept 1/2 inch, which is stiffer, vibrates less and is the safer choice for large raised panel and worktop bits. Never run a bit in an adaptor or a collet it does not exactly fit.
TCT, solid carbide or PCD
TCT bits are the standard for timber, ply and MDF, and many pro grade ones can be resharpened. Solid carbide suits small diameters, acrylics and spiral designs. PCD (diamond) tipped bits cost far more but last many times longer in abrasive stock such as chipboard and solid surface worktops, so they make sense for trade kitchen fitters.
Sets or single bits?
Starter sets are a cheap way to try profiles, but quality varies. Most joiners buy a few quality groovers, a flush trimmer and a rounding over bit first, then add specialist profiles as jobs need them. Keep them in a storage box with each bit in its own slot so edges do not chip against each other.
Routing safely
Take several shallow passes rather than one deep one, feed against the rotation, clamp the work, and use dust extraction. Keep hand and fingers well away from the bit, and wear eye and hearing protection. Our router bits for joinery guide goes deeper on profiles, and professional woodworking power tools covers the machines themselves.
Router cutter FAQs
Can I use 1/2 inch bits in a 1/4 inch machine?No. Bits must match the collet exactly. Some larger models come with 1/4 inch, 8mm and 1/2 inch collets, so check what your machine accepts.
How do I know when a bit is blunt?Burning, a fuzzy finish, more effort to feed and more noise are the usual signs. Clean off resin first, as build-up often mimics a dull edge.
Find more consumables in power tool accessories.



















