Counter Sink Bits
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Leogony 12PCS Countersink Drill Bit Set, Quick Counter Sink Drill Bits for Wood with Wrench
Original price was: £8.99.£7.99Current price is: £7.99. -
LESOLEIL Countersink Chamfer Deburring Drill Bit Set
Original price was: £10.99.£10.44Current price is: £10.44. -
LINXINS 11Pieces Countersink Drill Bit Set,6Pcs Countersink Bit for Metal 5Pcs Counter Sink Drill Bits for Wood High Speed Steel Counter Sinker Drill Bits for Woodworking, Wood Drilling
£5.99 -
Litorange 10 PCS Countersink Drill Bit Set, Counter Sink Drill Bits for Wood, 1/4" Hex Shank, #5 6 8 10 12 Include 5 PCS Replaceable Drill Bits
£7.99 -
Lytool 5Pcs Quick Change 8mm Adjustable Countersink Drill Bit
£10.99 -
Magicbox 5Pcs Countersink Drill Bit Set with Bearing Depth Stop and Limiter, Adjustable Tapered Wood Drill Bits (2.8-4.0mm), High-Speed Steel & Tungsten Alloy for Clean, Sharp Drilling, Portable Box
Original price was: £17.99.£14.39Current price is: £14.39. -
Magicbox M2 Cobalt HSS Countersink Drill Bit Set 15PCS, Tapered Bits+ Magnetic Extension Shaft, Wood Plug Cutters, Depth Stop Collars, PH1/PH2 Screwdriver Bits & Hex Key,Storage Box for Woodworking
Original price was: £14.00.£11.41Current price is: £11.41. -
Makita D-73455 Countersink with Drill Bit, 4 Piece Set
£7.92 -
Mesee 7 Pieces HSS Countersink Drill Bit Set 3mm 4mm 5mm 6mm 7mm 8mm 10mm High Speed Steel Counter Sink Bits Carpentry Chamfer Reamer Woodworking Chamfering Tool
Original price was: £9.99.£7.99Current price is: £7.99. -
Navoys Wood Countersink Drill Bit Set, 3pcs 1/4in Hex Shank, Chamfer Tool
£4.75 -
NQEUEPN 7pcs Countersink Drill Bit Set, Counter Sink Drill Bit for Wood with Wrenches Woodworking Countersink Bit for #6#8#10#12#16 Screws in Hard Wood Plastic Plate
£16.16 -
OCGIG 4 Pcs Titanium Coated Countersink Chamfer Tool Deburring Tool Set Metal Wood Drill Bits Set
£13.99 -
PEAPIN 6PCS Countersink Drill Bit Set, 5PCS 1/4in Hex Shank Countersink Bit
£5.99 -
Sneulletoys Countersink Drill Bit Set,5 Pcs Counter Sink Drill Bits for Wood,1/4 Hex Shank Adjustable Drill Bit Set for #5 6 8 10 12 Screws,5 Pcs Free Replaceable Drill Bits with One Allen Wrench
£9.99 -
TMBMLPP 5pcs Quick Change 6.35mm Adjustable Hex Countersink Drill Bit Set, includs 5 Woodworking Countersink Bits and5 Replaceable Bits & 5 Wrenches, for Wood – 2.8-4mm Tapered Drill Bit (Hexagonal)
£9.19 -
TMBMLPP 5pcs Quick Change 6.35mm Adjustable Hex Countersink Drill Bit Set, includs 5 Woodworking Countersink Bits and5 Replaceable Bits & 5 Wrenches, for Wood – 2.8-4mm Tapered Drill Bits (Round)
£7.59 -
TOLESA Countersink Drill Bit Set, 5PCS Nitride HSS for Wood, Metal, Plastic
£21.98 -
Trend 1/2 Inch TCT Countersink, Adjustable 3.5mm HSS Pilot Drill
£16.99 -
Trend 5-Piece Quick Release Countersink Set, 1/4 Inch Hex Shank, Tool Steel Body, HSS Drill Bit, 5 Pack, QR/CS/SET
£19.98 -
Trend Snappy 12.7mm TCT Countersink with 5mm HSS Drill, Adjustable Length, Quick Release System, SNAP/CS/5MMTC
£24.00
Choosing the right countersink drill bits
A countersink bit cuts a cone-shaped recess at the top of a hole so a countersunk screw head sits flush with, or just below, the surface. It is a small job that makes a big difference to how finished a piece of joinery, a kitchen fit or a set of shelves looks. Get it right and screws disappear neatly. Get it wrong and you end up with proud heads, split timber or chewed edges. Here is what to look for when you are choosing countersink drill bits for wood, plastic and metal. For a wider look at bits, see our guide to choosing drill bits for every material.
Types of countersink bit
The simplest type is a plain countersink with a cutting cone on a shank. You drill a pilot hole first and then use the countersink to chamfer the top. Combination bits put a tapered or straight drill and a countersink on one tool, so you drill the pilot hole and countersink in a single pass, which is a real time saver when you are fixing lots of screws. Many of these have an adjustable collar so you can set the drill length to suit the screw. Counterbore bits go one step further and cut a flat-bottomed recess so the screw head sits well below the surface, ready for a wooden plug. Plug cutters are often sold alongside them for this reason.
Angles and screw types
Most metric countersunk wood screws in the UK have a 90 degree head, so a 90 degree countersink is the usual choice. Imperial and some American screws use 82 degrees, and 100 or 120 degree countersinks turn up in sheet metal and aerospace work. Using the wrong angle means the head only touches the recess on one edge, which can crack the wood or leave the screw sitting proud. Check the screw packaging if you are not sure.
Flutes, materials and shanks
Single flute countersinks cut smoothly with little chatter and are good for deburring metal. Three and five flute designs cut faster and are popular for wood and plastic, though cheaper multi-flute bits can chatter and leave a rippled finish. HSS bits suit timber, plastics and soft metals such as aluminium and brass, while cobalt or carbide tipped bits last longer in steel and abrasive boards such as MDF. A 1/4 inch hex shank lets you drop the bit straight into an impact driver or quick-change chuck, and round shanks grip well in a three-jaw chuck.
Depth stops and getting a clean finish
A depth stop, often with a ball bearing so it does not mark the surface, lets you cut the same depth on every hole. That is ideal for hinges, cabinet hardware and decking, where consistency matters. Run the bit at a moderate speed, keep it square to the work and ease off as the cone reaches the right depth. Test on an offcut first, setting the depth so the screw head sits just below flush. In hardwoods, drilling a proper pilot hole first reduces the risk of splitting. If you are using an impact driver, our impact driver vs drill guide explains when a drill gives you better control.
Countersink drill bits FAQs
Do I need to countersink every screw? Not always. Many modern wood screws have nibs under the head that cut their own recess in softwood. In hardwood, MDF, laminates and near the edge of a board, a proper countersink gives a neater result and reduces splitting.
Can I countersink metal with a wood bit? Light deburring of aluminium is fine, but for steel use an HSS or cobalt countersink designed for metal, at a low speed with a drop of cutting oil.
Countersink or counterbore? Countersink when the head should sit flush. Counterbore when you want to hide the screw under a plug or fit a bolt head below the surface. Browse related bits in our power tool accessories, including drill bit sets.



















