Counter Sink Bits
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
6PCS Countersink Drill Bit Set for Wood – 90° Titanium Coated Counter Sink Bits with 1/4" Hex Shank (12mm/16mm/19mm) – Chamfering Tools for Soft Metals, PVC & DIY Woodworking Projects
£6.99 -
6Pcs Hss Countersink Drill Bit Set with 5 Flute 82 Degree Center Countersink Bits 1/4" Hex Shank Chamfering Drill Bits for Wood Quick Change Bit 6mm-19mm
£5.99 -
6PCS HSS Countersink Drill Bit Sets, 6.3-20.5mm
£7.69 -
7 Pcs Countersink Drill Bit Set, 1/4" Hex Shank Adjustable Countersink Set, Includes 2 Pcs Wood Plug Cutter, Woodworking Counterbore Hole Drill Bits for #5, #6, #8, #10, #12 Screws, with L-Wrench
Original price was: £6.79.£5.99Current price is: £5.99. -
8 Pack Woodworking Countersink Drill Bits Set 3in1, Heavy Duty 6542 Pilot Drill Bits Depth Adjustable, 82-Degree Chamfer, 6mm Hex Shank, for #4#6#8#10#12#14 Screws in Soft & Hard Wood
£18.98 -
Astriva 12PCS countersink drill bit set, counter sink drill bits for wood Woodworking tools and accessories
£6.99 -
ATOPLEE Countersink Drill Bit Set,1pc 90 Degree High Speed Steel Counter Sinker Drill Bits for Wood,Metal, Fiberboard, Plywood, Plastic, PVC(5-10mm, silver)
£5.99 -
AUTUUCKEE 5 Pcs Countersink Drill Bit Set, 10 Piece, Twist, Straight Shank, Alloy Steel, 6° Cutting Angle, For Wood, Plastic, Soft Metal
£7.99 -
Bestgle 3pcs 1/4 Inch Shank Countersink Drill Bit Set, 5 Flute 90° Chamfering Cutter, High Carbon Steel Chamfer Tapered Bits for Woodworking & Metalworking, 12mm 16mm 19mm
£4.99 -
Bosch 1609200315 13.0 x 50 x 1/4-Inch Countersink Hex Drill Bits
£7.69 -
Bosch 70-Pieces X-Line Titanium Drill and Screwdriver Bit Set (for Wood, Masonry and Metal, Accessories Drills)
Original price was: £31.54.£20.99Current price is: £20.99. -
Center Drill Bits Set, 7Pcs Counter Sink Drill Bit High Speed Steel 60-Degree Angle Centre Drill Bit Pillar Drill Bits Lathe Tools for Lathe Countersink Drill Bit – 1.0/1.5/2.0/2.5/3.0/4.0/5.0
£7.98 -
ChgImposs 6Pcs Countersink Drill Bit, 3 Edge 90 Degrees Chamfer End Mill Cutter Chamfering HSS Countersink Drill Bit
£12.99 -
ColumPRO 2.8 * 8 HSS Countersink Drill Bit for Wood – With Depth Stop and 1/4" Quick Release Hex Shank, High-Speed Steel for Precise Woodworking
£8.49 -
ColumPRO 9PCS Countersink Bits Set, Countersink Drill Bit Set for Wood with 4 Different Sizes Replaceable Drill Bits + Screwdriver Drill Bit Set Including One Bit Holder
£17.99 -
Countersink Drill Bit – 5 Countersink Drill Bit Sets with 5 Different Sizes + 5 Replaceable HSS Bits + 5 Wrenches for Precision Woodworking, Hole Diameter: 8mm for Woodworking Countersink Drill Bits
£9.29 -
Countersink Drill Bit Set – 5 Pieces, 82° 5-Flute High-Speed Steel, Round Shank Mill Cutter, for Metal, Wood, Plastic,Includes 1/4”, 3/8”, 1/2”, 5/8”, 3/4” Sizes-Ideal for Countersink, Deburring.
£7.95 -
Countersink Drill Bit Set 5Pcs Twist Drill Set Carpentry Reamer Wood Countersink Drill Bit for Wood-Plastic Soft Metal
£5.99 -
Countersink Drill Bit Set 5pcs, HSS Wood Drill Bits with 1/4" Hex Shank, Adjustable Countersink Bits Kit for Wood, Plastic & Soft Metal, Hex Drill Bit Set for Precise Counterboring
£6.59 -
Countersink Drill Bit Set with Low Friction Depth Stop, Adjustable Depth Woodworking Countersink Bits with 1/4" Hex Shank,Heavy-Duty Precision Drilling Tool,2.8/3.2/3.5/4.0mm Drill Bits
£12.99
Choosing the right countersink drill bits
A countersink bit cuts a cone-shaped recess at the top of a hole so a countersunk screw head sits flush with, or just below, the surface. It is a small job that makes a big difference to how finished a piece of joinery, a kitchen fit or a set of shelves looks. Get it right and screws disappear neatly. Get it wrong and you end up with proud heads, split timber or chewed edges. Here is what to look for when you are choosing countersink drill bits for wood, plastic and metal. For a wider look at bits, see our guide to choosing drill bits for every material.
Types of countersink bit
The simplest type is a plain countersink with a cutting cone on a shank. You drill a pilot hole first and then use the countersink to chamfer the top. Combination bits put a tapered or straight drill and a countersink on one tool, so you drill the pilot hole and countersink in a single pass, which is a real time saver when you are fixing lots of screws. Many of these have an adjustable collar so you can set the drill length to suit the screw. Counterbore bits go one step further and cut a flat-bottomed recess so the screw head sits well below the surface, ready for a wooden plug. Plug cutters are often sold alongside them for this reason.
Angles and screw types
Most metric countersunk wood screws in the UK have a 90 degree head, so a 90 degree countersink is the usual choice. Imperial and some American screws use 82 degrees, and 100 or 120 degree countersinks turn up in sheet metal and aerospace work. Using the wrong angle means the head only touches the recess on one edge, which can crack the wood or leave the screw sitting proud. Check the screw packaging if you are not sure.
Flutes, materials and shanks
Single flute countersinks cut smoothly with little chatter and are good for deburring metal. Three and five flute designs cut faster and are popular for wood and plastic, though cheaper multi-flute bits can chatter and leave a rippled finish. HSS bits suit timber, plastics and soft metals such as aluminium and brass, while cobalt or carbide tipped bits last longer in steel and abrasive boards such as MDF. A 1/4 inch hex shank lets you drop the bit straight into an impact driver or quick-change chuck, and round shanks grip well in a three-jaw chuck.
Depth stops and getting a clean finish
A depth stop, often with a ball bearing so it does not mark the surface, lets you cut the same depth on every hole. That is ideal for hinges, cabinet hardware and decking, where consistency matters. Run the bit at a moderate speed, keep it square to the work and ease off as the cone reaches the right depth. Test on an offcut first, setting the depth so the screw head sits just below flush. In hardwoods, drilling a proper pilot hole first reduces the risk of splitting. If you are using an impact driver, our impact driver vs drill guide explains when a drill gives you better control.
Countersink drill bits FAQs
Do I need to countersink every screw? Not always. Many modern wood screws have nibs under the head that cut their own recess in softwood. In hardwood, MDF, laminates and near the edge of a board, a proper countersink gives a neater result and reduces splitting.
Can I countersink metal with a wood bit? Light deburring of aluminium is fine, but for steel use an HSS or cobalt countersink designed for metal, at a low speed with a drop of cutting oil.
Countersink or counterbore? Countersink when the head should sit flush. Counterbore when you want to hide the screw under a plug or fit a bolt head below the surface. Browse related bits in our power tool accessories, including drill bit sets.



















