Clamps
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Spring Clamp, 50mm
£6.00 -
Stanley 083100 Band-Clamp 4.5m/15ft
£12.43 -
SWANLAKE 8-Piece 6-inch Spring Clamp, Heavy Duty Spring Metal Spring Clamps, 2.5-inch Jaw Opening
Original price was: £13.99.£11.99Current price is: £11.99. -
TOLESA Spring Clamps 7inch, 3" Jaw, 30lbs, Heavy Duty for Woodworking, 4pcs
£19.99 -
WEN 36053C 6" Quick Release Track Saw Clamps (2 Pack), Black
Original price was: £22.23.£17.92Current price is: £17.92. -
wolfcraft Corner Clamps Set of 4 – ES 22 Right Angle Woodworking Clamps
Original price was: £17.20.£14.59Current price is: £14.59. -
wolfcraft EHZ 65-150 One-Hand Clamp PRO, 90 kg Force, 150 mm Clamping Range
Original price was: £19.99.£11.20Current price is: £11.20. -
wolfcraft Ergo 30 Spring Clamp – Ergonomic Hand Clamp for Home Crafts
Original price was: £2.79.£2.06Current price is: £2.06. -
wolfcraft FZR Hobby Ratchet Clamp I 3016000 I The perfect clamp for hobbies or household repairs
£4.27 -
wolfcraft microtip 60 Pointed Spring Clamp I 3431000 I 2 precision clamps – ideal for use around the home and in craft projects
Original price was: £5.79.£4.80Current price is: £4.80. -
WORKPRO 150 mm Heavy Duty Ratchet Bar Clamp Set, F Clamps, 2-Pack
£12.99 -
WORKPRO 305 mm Ratchet Bar Clamp Set, 2-Pack
Original price was: £16.99.£13.59Current price is: £13.59. -
WORKPRO 4-Piece Woodworking Clamp Set, 150 mm & 120 mm
Original price was: £17.99.£14.39Current price is: £14.39. -
WORKPRO Clamp Set, 4-Pack 115 mm Mini Bar Clamps and 4-Pack Spring Clamps
Original price was: £17.99.£14.39Current price is: £14.39.
Choosing the right clamps for your workshop
You can never really own too many cramps, as joiners in the UK often call them. They’re the extra pair of hands that holds a job still while you glue, drill, screw or saw, and the right type makes the difference between a tight, square joint and one that slips the moment you let go. Here is a simple, step by step way to work out what you actually need.
Types of clamps and what they’re good at
G-cramps are the classic cast iron or forged steel frame with a screw thread. They give strong, steady pressure for metalwork, welding prep and holding a block or batten firmly in place on a bench.
F-cramps and sash cramps have a sliding arm on a steel rail, so you get a longer reach than a G-cramp. Sash cramps are the go-to for building doors, frames and table tops in oak, walnut or pine.
One-handed trigger cramps let you hold the work with one hand and tighten with the other. They’re ideal for quick dry fits and light tasks, though they do not give the same pressure as a screw thread.
Sprung cramps are cheap, light and handy for holding thin objects, dust sheets and veneers while glue sets.
Specialist types include corner cramps for picture frames and carcases, band cramps for odd shapes, toggle cramps for jigs, locking cramps that work like a self-grip wrench, and guide rail cramps for track saws. Pipe cramps use a length of standard pipe, so you can build long cramps for very little money.
Which type of clamp do I need?
Start with the jobs you do most. For general DIY and carpentry, a pair of 300mm F-cramps and a pair of smaller trigger cramps will cover most tasks. Add a couple of G-cramps if you do any metal or need to fix a straight edge to a sheet for sawing. Furniture makers should add sash or pipe cramps long enough to span the widest panel they glue up, because a wide top needs even pressure along its length.
What to check before you buy
Capacity and throat depth tell you how wide an object it can open to and how far in from the edge it can reach.
Clamping force is often listed in kilograms or newtons. More is not always better, as too much pressure starves a glued joint and can crush softwood.
Jaw pads in rubber or soft plastic protect the work from marks. If yours are bare steel, slip a scrap of wooden board between the jaw and the job.
Frame and handle matter. A stiff steel bar resists bending under load, and a comfortable handle makes a long glue-up far less of a chore.
Getting the best from them
Dry fit everything first so you know the cramps are set to roughly the right opening. Alternate them above and below a panel to keep it flat, check it is square by measuring the diagonals, and wipe off squeeze-out before it hardens. Keep the threads clean and lightly oiled and they will last for years. Our hand tools buying guide has more on building up a sensible kit, and our chisels pair well with cramps for cleaning up joints once the glue has set.
Clamps FAQs
What are clamps used for? Any time two or more pieces need holding together or a workpiece needs holding still: gluing, sawing, drilling, welding, routing and fixing jigs or guides to a bench.
Are clamps useful for more than just building? Very much so. They hold tarps and dust sheets, steady items for painting, secure work to a trestle for a quick cut, and help with car and bike repairs. A variety of sizes will earn its place in any shed or van.
How many do I need? At least two of any size you use, as most jobs need even pressure from both ends. Browse the rest of our hand tools range for vices and workholding to go with them.













