Clamps
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Dekton 2PC 4" Pro Clamp with 80mm Jaw Opening, Heavy Duty Rubber Non-Slip Grip, Durable Tough Plastic Construction, Hinged Jaws for Improved Grip on Uneven Surfaces, Ideal for Wood & DIY Projects
£5.99 -
Dekton 4PC 3" Pro Clamp with 35mm Jaw Opening, Heavy Duty Rubber Non-Slip Grip, Durable Tough Plastic Construction, Hinged Jaws for Improved Grip on Uneven Surfaces, Ideal for Wood & DIY Projects
£4.09 -
DSL Clamps for Woodwork, 4 x 103mm Jaws Ratchet Bar Clamp Set, Ideal Wood Clamp for Woodworking, Carpentry, DIY Projects
£8.99 -
EMART 6 Pack Heavy Duty Muslin Spring Clamps, 4.5 inch Backdrop Clips
Original price was: £9.99.£8.49Current price is: £8.49. -
F Clamps Bar Clamp Heavy Duty 150 x 50mm 6 Long Quick Slide Wood Clamp 4pc Set by Toolzone
£14.95 -
Faithfull FAIG8DT-TB 200mm 8-inch G-Clamp Deep Throat with 85mm 3-inch Cap, Multicolour
Original price was: £16.98.£13.49Current price is: £13.49. -
Hilka 64020724 24-Inch Quick Release Bar Clamp, red and black
£13.48 -
HORUSDY 8-Pack Spring Clamps Heavy Duty, 5-inch Large Plastic Clamps for Crafts with 2-3/8Inch Jaw Opening for DIY, Gluing, Clamping and Securing
Original price was: £14.99.£12.10Current price is: £12.10. -
IRWIN Irwin Visegrip 6R Locking C Clamp 6In – Regular Tip Silver
£15.07 -
Irwin Q/GT546EL7 Mini Bar Clamp, 150mm, Black
Original price was: £8.72.£6.99Current price is: £6.99. -
IRWIN Quick-Grip Clamps, One-Handed, Mini Bar, 6-Inch, 4-Pack (1964758) , Black
£32.77 -
IRWIN QUICK-GRIP Light-Duty (63kg) Mini (300mm) Trigger Clamp, Twin Pack, T54122EL7
Original price was: £12.86.£10.99Current price is: £10.99. -
IRWIN T5462EL7 QUICK-GRIP 150mm (6) Mini Clamp – 2 Pack, Multi
£13.99 -
IRWINQUICK-GRIPOne-Handed Bar Clamp, Heavy-Duty, 6", 1964711
£19.49 -
JJWNMLL 10Pcs Nylon Spring Clamps 2Inch Mini Clips,Plastic Spring Clamps
Original price was: £5.99.£5.69Current price is: £5.69. -
JORGENSEN 2-Pack 300 mm Woodworking Clamps Set with 136 kg Clamping Force
Original price was: £17.99.£14.53Current price is: £14.53. -
JORGENSEN 4-Pack 150 mm Woodworking Clamps, Splicable to 400 mm Bar Clamps
Original price was: £29.99.£25.49Current price is: £25.49. -
JORGENSEN Ratchet Track Saw Clamp Set, Quick Release Guide Rail Clamps
Original price was: £33.99.£25.83Current price is: £25.83. -
KREG KHCRA Right Angle Clamp – with Automaxx – Silver
£38.99 -
LATERN 10Pcs Plastic Spring Clamps, 6 Inch Extra Strength Work Clips Heavy Duty Plastic Muslin Clamps for Photo Studio Woodwork Artwork
£11.99
Choosing the right clamps for your workshop
You can never really own too many cramps, as joiners in the UK often call them. They’re the extra pair of hands that holds a job still while you glue, drill, screw or saw, and the right type makes the difference between a tight, square joint and one that slips the moment you let go. Here is a simple, step by step way to work out what you actually need.
Types of clamps and what they’re good at
G-cramps are the classic cast iron or forged steel frame with a screw thread. They give strong, steady pressure for metalwork, welding prep and holding a block or batten firmly in place on a bench.
F-cramps and sash cramps have a sliding arm on a steel rail, so you get a longer reach than a G-cramp. Sash cramps are the go-to for building doors, frames and table tops in oak, walnut or pine.
One-handed trigger cramps let you hold the work with one hand and tighten with the other. They’re ideal for quick dry fits and light tasks, though they do not give the same pressure as a screw thread.
Sprung cramps are cheap, light and handy for holding thin objects, dust sheets and veneers while glue sets.
Specialist types include corner cramps for picture frames and carcases, band cramps for odd shapes, toggle cramps for jigs, locking cramps that work like a self-grip wrench, and guide rail cramps for track saws. Pipe cramps use a length of standard pipe, so you can build long cramps for very little money.
Which type of clamp do I need?
Start with the jobs you do most. For general DIY and carpentry, a pair of 300mm F-cramps and a pair of smaller trigger cramps will cover most tasks. Add a couple of G-cramps if you do any metal or need to fix a straight edge to a sheet for sawing. Furniture makers should add sash or pipe cramps long enough to span the widest panel they glue up, because a wide top needs even pressure along its length.
What to check before you buy
Capacity and throat depth tell you how wide an object it can open to and how far in from the edge it can reach.
Clamping force is often listed in kilograms or newtons. More is not always better, as too much pressure starves a glued joint and can crush softwood.
Jaw pads in rubber or soft plastic protect the work from marks. If yours are bare steel, slip a scrap of wooden board between the jaw and the job.
Frame and handle matter. A stiff steel bar resists bending under load, and a comfortable handle makes a long glue-up far less of a chore.
Getting the best from them
Dry fit everything first so you know the cramps are set to roughly the right opening. Alternate them above and below a panel to keep it flat, check it is square by measuring the diagonals, and wipe off squeeze-out before it hardens. Keep the threads clean and lightly oiled and they will last for years. Our hand tools buying guide has more on building up a sensible kit, and our chisels pair well with cramps for cleaning up joints once the glue has set.
Clamps FAQs
What are clamps used for? Any time two or more pieces need holding together or a workpiece needs holding still: gluing, sawing, drilling, welding, routing and fixing jigs or guides to a bench.
Are clamps useful for more than just building? Very much so. They hold tarps and dust sheets, steady items for painting, secure work to a trestle for a quick cut, and help with car and bike repairs. A variety of sizes will earn its place in any shed or van.
How many do I need? At least two of any size you use, as most jobs need even pressure from both ends. Browse the rest of our hand tools range for vices and workholding to go with them.



















