Screwdriver Bits
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Magnetic Drill Bit Extender Set 4pcs, 1/4 Hex Bit Holder for Impact Driver
£6.79 -
Makita B-26490 50 Piece Screw Bits PH2x50mm
Original price was: £23.99.£19.79Current price is: £19.79. -
Makita B-66830 Impact Black Nutsetter
£3.68 -
Milwaukee – Shockwave Impact Duty Screwdriver Bit Carabiner Set 10 Piece, Variety Pack
£7.07 -
Milwaukee 4932472037 PH2 25mm Shockwave Screwdriver Bits Pack of 25
£9.99 -
Milwaukee 4932472041 PZ2 25 Piece Shockwave Screwdriver Bits 25mm
£11.60 -
Milwaukee Shockwave Impact Duty Pozi Screwdriver Bit – PZ2 x 90mm (1 Pack)
£5.99 -
Milwaukee Shockwave PZ2 50mm Screwdriver Bits Pack of 10 4932472050
£12.99 -
Rolson 28429 51 Pc Screwdriver & Bit Set
£8.47 -
Ryobi RAK17SD Screwdriver Bit Set (17 piece)
£8.99 -
RYOBI RAK48SDI Torque Plus Impact Screwdriver Bit Set, 48 Piece
Original price was: £32.49.£20.79Current price is: £20.79. -
SabreCut 20pcs SCPB25_20 25mm PZ2 PZ3 PH2 Heavy Duty Mixed Impact Bit Set
£9.99 -
SabreCut 21pcs SCPA25_21 55mm Magnetic Impact Bit Holder & 25mm PZ2 Bits
£7.49 -
SabreCut 4pcs SCRK1 60mm & 152mm Magnetic Impact Bit Holders Kit 1/4" Shank
£7.99 -
SabreCut 5pcs SCPH289_5 89mm PH2 Impact Screwdriver Bits Heavy Duty
£7.99 -
SabreCut 5pcs SCPZ2152_5 152mm PZ2 Impact Screwdriver Bits Heavy Duty
£8.99 -
SabreCut 5pcs SCPZ289_5 89mm PZ2 Impact Screwdriver Bits Heavy Duty
£7.99 -
Saxton 10x PH2-50mm Impact Duty Phillips Screwdriver Drill Driver Bits Sets Tic Tac Box Dewalt Milwaukee Bosch
£7.99 -
Saxton 10x PZ2-50mm Pozi-Drive 2 Impact Duty Screwdriver Drill Driver Bits Sets Tic Tac Box Dewalt Milwaukee Bosch
£7.99 -
Saxton 24x PH2-25mm Impact Duty Phillips Screwdriver Drill Driver Bits Sets Tic Tac Box fits Dewalt Milwaukee Bosch
£8.49
Choosing the right screwdriver bits
A worn or wrong-sized bit is the main reason screws cam out, heads strip and fixings go in crooked. Good screwdriver bits are cheap compared with the time they save, and matching the bit to the screw and the tool makes every fixing faster and neater. Here is what to look for, whether you are a tradesperson driving hundreds of screws a day or a DIYer putting up shelves.
Know your drive types
Pozidriv (PZ): the standard for most wood screws sold in the UK. PZ2 is the size you will use most, with PZ1 and PZ3 for smaller and larger screws.
Phillips (PH): looks similar but has a different profile. It is common on plasterboard screws, electrical fittings and imported furniture. Using a PZ bit in a PH screw, or the other way round, is a common cause of cam-out.
Torx (TX): increasingly popular for decking, structural and timber frame screws because it grips well and rarely slips. T20, T25 and T30 cover most jobs.
Hex, slotted and security bits: for machinery, older fittings and tamper-proof fixings on appliances and public fittings.
Impact rated or standard
If you use an impact driver, buy impact rated bits. They are made from tougher steel with a torsion zone that flexes slightly to absorb the hammering, so they last far longer and are less likely to snap. Standard bits are fine in a drill driver or hand screwdriver, but they wear quickly under impact. Our impact driver vs drill guide explains the difference between the two tools.
Length, holders and extensions
25mm insert bits are the most common and need a bit holder. 50mm to 90mm power bits fit straight into an impact driver and reach into recesses more easily. A magnetic bit holder holds the screw on the tip, which makes one-handed work and overhead fixings far easier. Extensions and flexible shafts help in tight spots such as cabinets and between joists.
Sets or bulk packs
A mixed set with PZ, PH, Torx and hex sizes in a case is the best place to start, and handy to keep in the van or kitchen drawer. Once you know which sizes you get through, buy bulk packs of those, usually PZ2 and T25. It is cheaper and means you can swap to a fresh bit as soon as one starts slipping. For more on putting together a kit, see our hand tools buying guide.
Making bits last
Push firmly in line with the screw, use the correct size, and let the clutch or impact do the work. Replace a bit as soon as the tip looks rounded; carrying on just damages screw heads. Keep bits in a holder or case rather than loose, where they rust and get mixed up.
Screwdriver bit FAQs
What is the difference between PZ2 and PH2?Pozidriv has extra small ribs between the main cross, which gives a better grip in Pozidriv screws. They look similar, but using the wrong one causes slipping and stripped heads.
Do I need impact bits for a drill driver?Not essential, but they do last longer in any tool. For an impact driver they are a must.
Will bits from one brand fit another brand’s tool?Yes. Almost all bits use the standard 1/4 inch hex shank, so they fit any modern drill driver, impact driver or bit holder.
See the wider power tool accessories range, or browse socket sets for nut and bolt work.



















