Plumbing Tools
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Inside Pipe Cutter for PVC Pipe, Inside Tube Plumbing Pipe Cutter Tool
Original price was: £9.35.£8.95Current price is: £8.95. -
JD Brands Back Nut Box Spanner – 1/2" – 3/4" – Heavy-Duty Tap Backnut Tool for Tight Spaces – Dual Ended Sink Basin Plumbing Spanner
£6.99 -
Juwacoo 6 Pcs Copper Pipe Cleaners, 1/2, 3/4, 1 Inch Plumbers Tools Pipe Cleaning Brush, Tube Cleaning Brush for Plumbing Tube Cleaning and Metal Surface Maintenance
£8.20 -
LOCCY 8 in 1 Faucet Wrench Tool – Sink Faucet Installer Socket Wrench Kit – Plumbing Pipe Spanner Tool for Bathroom Kitchen
Original price was: £8.99.£7.99Current price is: £7.99. -
MAXPOWER Water Pump Plier, 250mm/10inch Quick Change Adjustable Multigrip Groove Joint Pliers Plumbing Clamp Tools Tongue-and-Groove Pliers with Non-Slip Rubber Handle
£13.98 -
Multifunctional Tap Wrench Set – 7 Sizes Universal for Washbasin, Sink, Under Sink – Four Claw Hex Wrench for Plumber – Kitchen and Bathroom
£7.98 -
Nerrad Tools NTSWS2 Super Wide Stubby Wrench Jaw, Black, 32 mm
£21.39 -
Ninoclar 14-in-1 Multi-Functional Wrench for Toilet, Sink, Bathroom, Kitchen Plumbing Installation and Repairs
£8.99 -
Ninoclar 8-in-1 Multi-Functional Wrench for Toilet, Sink, Bathroom, Kitchen Plumbing Installation and Repairs
£6.99 -
Olive Puller – Two-in-One High-Strength Olive Removal Tool for Plumbing, Durable and Easy to Use
£8.99 -
Olive Puller Tool 15mm & 22mm – Solid Brass Tube Fitting Remover for Plumbing | Easy Removal for Compression Fittings | Durable, Non-Slip, Olive Extractor for DIY & Professionals
Original price was: £8.79.£7.99Current price is: £7.99. -
OX Pro 8" Extra Wide Jaw Adjustable Wrench, Soft Grip, 200mm, Spanner
Original price was: £24.42.£19.99Current price is: £19.99. -
Pipe Squeeze-Off Tool 16-63mm for PE/PPR/PVC Plastic Water Pipe
£29.99 -
Pipemaster Professional Plumbing tool (PP8LZ50)
£87.00 -
Pipestation 15mm & 22mm Compression Fitting Split Ring Spanner | Double End Open Ring Flare Nut Wrench | Plumbing Compression Nut Tool for Tight Spaces | Drop Forged Steel
£11.99 -
Pipestation Squeeze Off Tool 0-32mm Opening | Plumbing Tools for Isolating Mains MDPE Plastic Pipe or Rubber Pipe | Plumbers Hand Tools for Water Isolation | Clamping Tool Stops Water Flow
£24.99 -
Plumb Chum universal bleed key, meter box key, The original Keyring Plumbing Multi Tool for professional and DIY, magnetic hex holders, radiator balancing tool, bottle opener, coin tool, 10mm spanner.
£13.99 -
Plumbing Pipe/Auto Tube Cutter 8mm for Copper Tubing/Hand Operated
£10.99 -
QTMMC Adjustable Spanner Wrench 6-68mm Wide Jaw Opening Plumbing Spanner
£6.99 -
Radsocken 1 Pack Adjustable Spanner Wrench, 6-68 mm Opening Wide Jaw Spanners, Alloy Wrench Spanners Ultra-Thin Shifting Spanner Tap Plumbing Basin Wrench Hand Tools for Bathroom Washbasin
£6.98
Plumbing tools buying guide: what you actually need
Good kit makes the difference between a quick, dry repair and an afternoon of mopping up. Whether you are swapping a tap, fitting a radiator or tracing a leak, this short plumbing tools buying guide covers the basic list most homes need, the extras a working plumber carries, and what to check before you buy.
The basic plumbing tools list for the home
You do not need a van full of gear to handle everyday jobs. A sensible starter list looks like this:
Water pump pliers: the plumber’s tool most people reach for first. Two pairs of water pump pliers, one small and one large, cover waste traps, compression nuts and tap connectors.
Basin wrench: a basin wrench lets you reach the back nuts on taps in the cramped space behind a basin, where nothing else will turn.
Pipe cutters: 15mm and 22mm slice cutters give square, clean ends that seal properly. Adjustable pipe cutters handle a wider range of sizes. See our pipe cutters for the full selection.
Deburring and olive pullers: a deburrer removes the sharp edge after you cut, and an olive puller takes old compression olives off without wrecking the fitting.
PTFE tape and a plunger: cheap, small and essential for sealing threads and clearing a blocked trap.
Extras a plumber carries
For trade work and bigger projects the list grows. A pipe wrench is ideal for gripping steel pipe and stubborn threaded fittings, while a strap wrench uses a rubber or nylon strap to turn chrome fittings, filter housings and plastic waste without marking them. Pipe benders form neat bends without extra fittings, and soldering kits are needed for end feed and solder ring joints. Pressure testing kits check new runs before they are filled with water, and drain rods and augers clear blocked drains.
Power tools play a part too. Many plumbers carry a cordless drill for clips and brackets, and a cordless press or pipe cutter on larger jobs. Our cordless pipe cutters and cordless drain cleaners are worth a look if you do this work every day.
What to check before you buy
Plumbing kit lives in damp cupboards and gets dropped in wet places, so build quality matters. Look for forged or chrome vanadium metal rather than soft cast parts, and cutters with replaceable wheels. Tightening and loosening corroded nuts takes real force, so a comfortable, non slip handle is worth paying a little more for. Check the sizes too: 15mm and 22mm cover most UK domestic pipework, with 28mm on some heating systems.
Brands such as Rothenberger, Monument, Draper and Ridgid offer reliable trade quality, and there are good value options for occasional DIY work.
Keeping it all together
A decent tool bag or roll keeps everything in one place, so you can find the right piece fast when water is running. Plumbers often keep a small tool bag for first fix and a separate box for fittings. Our tool bag guide is written for sparks, but the same advice on size and pockets applies.
Plumbing tools FAQs
What are the basics of plumbing? Water comes in under mains pressure through supply pipes, and waste leaves by gravity through larger plastic pipes and traps. Most DIY jobs involve isolating the supply, making a sound joint and checking for leaks before you turn the water back on.
Can I do my own plumbing work? Changing a tap washer, fitting a new tap or clearing a trap is well within DIY range. Anything involving gas must be done by a Gas Safe registered engineer, and work on unvented hot water cylinders needs a qualified installer.
Push fit or compression fittings? Push fit is quick and needs very little kit. Compression joints take a bit longer but come apart easily later.
Browse the full hand tools range, or see pliers and cutters for more grips and water pump pliers.



















