Plumbing Tools
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
DRAAK Adjustable Wrench 8 Inch 200mm with Wide Caliber Opening Plumbing Spanner Heavy Duty Professional Quality Hand Tool
£11.65 -
Draper 130mm Manhole Keys | Set of 2 Plumbing Tools | Plumber Hand Tool | 89721
Original price was: £14.01.£11.74Current price is: £11.74. -
Draper Basin Wrench, 1/2"/15mm x 3/4"/22mm BSP 10876
£12.99 -
Draper Ratchet Tap Wrench, M5-M12 24554
£14.67 -
Draper Redline 240mm Water Pump Pliers | Adjustable Pliers Wrench | Plumbing Tools | Carbon Steel | 67643
£8.54 -
DURATECH 8-Inch/200 mm Adjustable Spanner with Wide Jaw, Cr-V, SAE & Metric
£13.99 -
Durovin Bathrooms 6 Pcs Tubular Box Wrench Set 8-17mm Tube Bar Spark Plug Spanner Metric Tool Set with Tommy Bar for Plumbing, Installations, and Vehicle Repairs
£5.99 -
Elezenioc Adjustable Spanner Wrench 6-68mm Open-End Wide Jaw Spanners Wrenches Ultra-Thin Shifting Spanner Shank Plumber Bathroom Hand Tool Alloy
£5.99 -
Evo Professional 15mm & 22mm Compression Fitting Spanner for Plumbing
£16.40 -
Footprint 900w Pipe Wrench – Thumbturn 9.in, Steel, 9", 225mm
£26.00 -
Fuyamp Adjustable Wide Jaw Spanner Wrench, 6-68mm Opening, Alloy Ultra-Thin Shifting Tool for Bathroom Plumbing Basin and Washbasin
£5.38 -
Générique 8 in 1 Sink Installation Tools, Key for Sink Faucet, Faucet Installation Key, for Kitchen Bathroom Toilet Bowl Kitchen Plumbing (Red)
£6.69 -
GoPaw Multi Tool Faucet Wrench 8 in 1, Faucet Wrench Tool Kitchen Faucets Sink Basin Wrenchs Tap Spanner for Sinks/Bathroom/Kitchen
Original price was: £6.98.£6.49Current price is: £6.49. -
GQunit Tap Spanner Tool, 14-in-1 Multi-Functional Faucet Wrench, Comfortable Grip,Tools Tap Backnut Spanner Set, Anti-Slip, for Sink, Bathroom and Kitchen Plumbing Repair
£7.99 -
Hand Torch JH-801 with Map Gas Cylinder 400g, Map Pro Plus Disposable Cylinder Bottle Cartridge for Blow Torch, Plumbing Tools, Canisters for Plumbers, Soldering Torch, Mechanics, Jet Burner
£34.99 -
HAUTMEC 11Inch(280mm) Basin Wrench Sink Faucet Wrench for Tight Spaces with 3/8" to 1-1/4"(10-32mm) Capacity Adjustable Tap Spanner Set Plumbing Wrenches Tools for Faucet Hex Nuts Under Sink, PL0024
Original price was: £9.99.£9.49Current price is: £9.49. -
HAUTMEC 300mm(12") Water Pump Pliers, Fast Adjustable Tongue and Groove Joint Pliers, V-Jaw with Comfort Grips, Rust-Proof CRV Steel Construction for Plumbing, Home Repair, and Pipe Fittings
£18.99 -
Heatlab Plumbing & Heating Bungs, Central Heating Plumbing Bungs
Original price was: £13.99.£9.99Current price is: £9.99. -
Heatlab The Ultimate Radiator Key – Dual-Sized Imperial & Metric
Original price was: £7.99.£6.99Current price is: £6.99. -
IBEIKE 8 in 1 Faucet Wrench Tool Set for Kitchen – Red Plumbing Tools Tap Spanner Multi-Purpose Wrench for Tight Space, Sink Toilet Bowl, Bathroom Repair Installation
£8.77
Plumbing tools buying guide: what you actually need
Good kit makes the difference between a quick, dry repair and an afternoon of mopping up. Whether you are swapping a tap, fitting a radiator or tracing a leak, this short plumbing tools buying guide covers the basic list most homes need, the extras a working plumber carries, and what to check before you buy.
The basic plumbing tools list for the home
You do not need a van full of gear to handle everyday jobs. A sensible starter list looks like this:
Water pump pliers: the plumber’s tool most people reach for first. Two pairs of water pump pliers, one small and one large, cover waste traps, compression nuts and tap connectors.
Basin wrench: a basin wrench lets you reach the back nuts on taps in the cramped space behind a basin, where nothing else will turn.
Pipe cutters: 15mm and 22mm slice cutters give square, clean ends that seal properly. Adjustable pipe cutters handle a wider range of sizes. See our pipe cutters for the full selection.
Deburring and olive pullers: a deburrer removes the sharp edge after you cut, and an olive puller takes old compression olives off without wrecking the fitting.
PTFE tape and a plunger: cheap, small and essential for sealing threads and clearing a blocked trap.
Extras a plumber carries
For trade work and bigger projects the list grows. A pipe wrench is ideal for gripping steel pipe and stubborn threaded fittings, while a strap wrench uses a rubber or nylon strap to turn chrome fittings, filter housings and plastic waste without marking them. Pipe benders form neat bends without extra fittings, and soldering kits are needed for end feed and solder ring joints. Pressure testing kits check new runs before they are filled with water, and drain rods and augers clear blocked drains.
Power tools play a part too. Many plumbers carry a cordless drill for clips and brackets, and a cordless press or pipe cutter on larger jobs. Our cordless pipe cutters and cordless drain cleaners are worth a look if you do this work every day.
What to check before you buy
Plumbing kit lives in damp cupboards and gets dropped in wet places, so build quality matters. Look for forged or chrome vanadium metal rather than soft cast parts, and cutters with replaceable wheels. Tightening and loosening corroded nuts takes real force, so a comfortable, non slip handle is worth paying a little more for. Check the sizes too: 15mm and 22mm cover most UK domestic pipework, with 28mm on some heating systems.
Brands such as Rothenberger, Monument, Draper and Ridgid offer reliable trade quality, and there are good value options for occasional DIY work.
Keeping it all together
A decent tool bag or roll keeps everything in one place, so you can find the right piece fast when water is running. Plumbers often keep a small tool bag for first fix and a separate box for fittings. Our tool bag guide is written for sparks, but the same advice on size and pockets applies.
Plumbing tools FAQs
What are the basics of plumbing? Water comes in under mains pressure through supply pipes, and waste leaves by gravity through larger plastic pipes and traps. Most DIY jobs involve isolating the supply, making a sound joint and checking for leaks before you turn the water back on.
Can I do my own plumbing work? Changing a tap washer, fitting a new tap or clearing a trap is well within DIY range. Anything involving gas must be done by a Gas Safe registered engineer, and work on unvented hot water cylinders needs a qualified installer.
Push fit or compression fittings? Push fit is quick and needs very little kit. Compression joints take a bit longer but come apart easily later.
Browse the full hand tools range, or see pliers and cutters for more grips and water pump pliers.



















