Independent UK tool guide · Prices checked daily · Checkout and delivery by Amazon UK
UK Tool Store
Buying guides Price drops About

Chainsaw Accessories

Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.

Price drops Buying guides Bare tool vs kit Battery guide

Showing 61–80 of 89 results

Choosing the right chainsaw accessories
A good set of spares and maintenance kit does more for cutting performance than most people expect. Sharp cutters, a straight guide bar and the right oil keep a machine working safely, whether you run a Stihl chainsaw, a Husqvarna, Makita or a battery-powered model from Greenworks. The products here cover the parts that wear out and the kit that makes the job easier, and this guide explains what to check before you order.

Replacement chains: pitch, gauge and drive links
Every loop is described by three numbers, and all three must match your bar. Pitch is the spacing between links, with 3/8″ low profile, full 3/8″ and .325″ the common sizes in the UK. Gauge is the thickness of the drive links where they sit in the groove, usually 1.1mm (.043″), 1.3mm (.050″), 1.5mm (.058″) or 1.6mm (.063″). The drive link count, written as 56DL or 62DL for example, sets the length.
The easiest way to get it right is to read the numbers stamped near the mount, which show pitch, gauge and length together. A typical 40cm setup on a mid-size petrol model takes a chain 3/8 LP with 56 links, while 45cm often needs 62DL, but always check rather than assume. A 1.3mm gauge loop will not run safely in a 1.6mm groove, even if the length looks right, and the same goes for 1.1mm in a 1.3mm groove. Most 3/8 LP loops for 35cm and 40cm bars are 1.3mm, and both Oregon and Stihl make 1.3mm versions for popular models. If in doubt, 1.3mm is the size to check for first.

Guide bars and sprockets
Guide bars wear unevenly, especially along the bottom rail, and a worn groove lets the cutters lean and run crooked. Flip it each time you sharpen so it wears evenly, and replace it if the rails are burred or splayed. Fitting a longer one than the manufacturer lists is a false economy, as the engine or motor will lose power and stall more easily. New cutters on a worn drive sprocket also wear quickly, so many owners swap the sprocket every second or third replacement.

Sharpening files, grinders and stones
Round files are sized to the pitch. A chainsaw file 5/32″ (4.0mm) suits most 3/8 LP and small loops, 3/16″ (4.8mm) suits .325″ and 7/32″ suits full 3/8″. A holder or guide keeps the angle consistent, which matters more than speed and keeps the cut straight. If you get through a lot of timber, a bench grinder style sharpener saves time, and some battery saws use a built-in diamond or ceramic stone system instead. Whatever you use, take the same number of strokes on every cutter and check the depth gauges every few sharpens. A little experience goes a long way here.

Oil and the Stihl range
Bar and chain oil is designed to cling to fast-moving links, so engine oil or cooking oil is not a substitute. Bio oils are worth considering for garden and woodland work, and Stihl, Oregon and Husqvarna all sell oil products in sizes from 1 litre upwards. Stihl makes its own oils, files and replacement loops, and Stihl chain is a sensible default if you own a Stihl chainsaw, but Oregon parts fit Stihl models too, along with many other brands. Branded products are not compulsory, but matching the spec is, and Stihl chainsaw owners will find most Stihl parts listed by model number, which makes ordering simpler. More power from a bigger Stihl or Husqvarna engine also means more wear, so budget for spares accordingly.

Protective kit and storage
A bar cover, sometimes called a scabbard, protects the cutters and anyone carrying the machine. If you move to a longer bar, a scabbard extension or larger cover keeps the whole length covered. Trouser braces, sawhorses and log stands also sit in this range, alongside Stihl and Husqvarna branded products for storage and transport. Stock on Amazon UK changes often, so check the listing for current availability. For protective clothing and safe use, the HSE tree work guidance is the best place to start. You can also browse log splitters, read our garden machinery maintenance guide, or head back to Lawn & Garden for more products.

Chainsaw accessories FAQs
How do I know which replacement fits my saw? Read the pitch, gauge and drive link count stamped on the bar or listed in the manual, then match all three. Most products on this page list the same details in the title.
How often should I sharpen? When it makes dust instead of chips, or needs pushing through the timber, it is time. For regular users that can mean a quick touch-up at every refuel.
Are non-branded loops any good? In our experience many are fine, as long as they match the specification exactly. Look for clear pitch and gauge information, and low-kickback designs if you only use a saw occasionally.