Independent UK tool guide · Prices checked daily · Checkout and delivery by Amazon UK
UK Tool Store
Buying guides Price drops About

Tap & Die Sets

Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.

Price drops Buying guides Bare tool vs kit Battery guide

Showing 1–20 of 99 results

Choosing the right tap and die set
A tap cuts an internal thread in a drilled hole, and a die cuts an external thread on a rod or bolt. Together they let you make new threads, clean up damaged ones and rescue stripped fixings on cars, bikes, machinery and workshop projects. The trick is picking a set that matches the threads you actually work with.
Metric, imperial and British standard threads
Most modern UK work is metric coarse, typically M3 to M12, so a metric set covers the bulk of jobs on cars, bikes and general fabrication. Older British machinery, classic cars and motorbikes often use BSW, BSF or BA threads, while American kit uses UNC and UNF. Mixed metric and SAE sets are handy if you see a bit of everything, but check the size range carefully, as big sets sometimes pad the numbers with sizes you will rarely use.
Taper, second and plug taps

Taper taps have a long lead and start the thread easily and straight.
Second (intermediate) taps carry the thread further down the hole.
Plug or bottoming taps finish threads right to the bottom of a blind hole.

Many sets include just one tap per size, which is fine for through holes. If you regularly thread blind holes, it is worth having the full taper, second and plug trio in the sizes you use most.
Materials and build quality
High speed steel (HSS) taps and dies hold an edge well and suit steel, stainless and aluminium. Carbon steel versions are cheaper and fine for occasional thread repair in softer metals, but they wear and snap more easily. Look for a sturdy tap wrench, a die stock that holds the die without wobble, and a case with clearly marked sizes so you can find the right one quickly. Split or adjustable dies let you fine tune the fit of a thread.
Getting a clean thread
Drill the correct tapping size first, as a tapping drill chart or the size marked on the tap tells you. Use cutting fluid, keep the tap square to the work and back it off half a turn every turn or so to break the swarf. Forcing a tap is the quickest way to snap one in the hole. If you need the right drill, see our guide on choosing drill bits for every material, and browse more hand tools or our hand tools buying guide.
Tap and die sets FAQs
What size tap and die set do I need? For general work, a metric set from M3 to M12 covers most nuts, bolts and machine screws. Add imperial or British standard sizes only if you work on older or American equipment.
Can I use a tap and die to repair a damaged thread? Yes. Running the matching tap or die through a bruised thread cleans it up. For badly stripped holes, a thread repair insert kit is usually the better fix.
Are cheap sets worth it? For occasional repairs on soft metals, a budget carbon steel set does the job. If you thread steel regularly, HSS is worth paying for.