Independent UK tool guide · Prices checked daily · Checkout and delivery by Amazon UK
UK Tool Store
Buying guides Price drops About

Plunge Saw Accessories

Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.

Price drops Buying guides Bare tool vs kit Battery guide

Showing 1–20 of 37 results

Choosing the right plunge saw accessories
A plunge saw is only as accurate as the rails it runs on. The right plunge saw accessories turn a good saw into a proper cutting system for kitchen worktops, sheet materials, doors and flooring, and the wrong ones can leave you with a step in the middle of a long cut. Here is what is worth buying, what to check for compatibility, and how to keep everything cutting square.

Guide rails and rail connectors
Guide rails are the heart of any track saw setup. Most brands sell rails in lengths of around 800mm, 1.4m, 1.5m and 2.5m or more. A 1.4m or 1.5m rail covers most panels and doors, while longer rails suit full 2440mm sheets and worktops.
If you do not want to carry a very long rail around, two shorter rails and a pair of rail connectors give you extended cutting lengths. The connectors slot into the channels on the underside and lock the guide rails together. Fit them on a flat surface and check the joint with a straightedge before you tighten, as a tiny kink shows up as a ridge on the cut edge.

Compatibility between brands
Makita and Festool rails share a very similar profile, so many saws, rails and plunge saw accessories work across both. Bosch has its own FSN rails and needs Bosch adaptors for some third party saws. DeWalt rails also follow a near-Festool profile, though it is worth checking the specific saw. Before you buy, look at:

Which saw bases the rail is made for, by brand and model
Whether connectors suit your rail profile
Whether clamps fit the T-slot on the underside of your rails
Whether a replacement splinter guard strip matches your blade and rail

Clamps, squares and angle stops
Rails normally grip well on their own, but clamps stop any movement on smooth melamine, narrow strips or steep bevel cuts. A track square or 90° angle stop lets you set cross cuts on wide panels much faster than measuring both ends, which saves real time when you are batching cabinet sides. These are some of the most useful saw accessories for joiners and carpenters doing repeat work.

Splinter guards, blades and dust
The rubber splinter strip along the edge of the rail is what gives a plunge saw its clean, chip-free finish. Once it is worn or trimmed for a different blade, replace it. A sharp, fine tooth blade and a decent extractor matter just as much: good dust collection helps you see the line and keeps the rail clean. Our guide to corded vs cordless saws covers the power side, and the Makita track saw review looks at a popular system in detail.

Storage, transport and safety
Long rails are easy to damage, so a padded carry bag or rail storage case is one of those essential accessories people forget. A bent rail cannot be trusted for accurate work. When cutting, keep the power tool cable or battery clear of the rail, support both sides of the board so the offcut does not drop and pinch the blade, and always wear eye protection and suitable dust masks for sheet materials.

Plunge saw accessories FAQs
Can Bosch guide rails be used with saws from other brands?Bosch FSN rails have their own profile, so most other saws need an adaptor, and fit varies by model. If you run mixed brands, Makita and Festool rails are the easier pairing.
How do I maintain the accuracy of my guide rail system?Store rails flat or hung in a bag, keep the base and channels clean, adjust any play in the saw base, and replace the splinter strip when it wears. Check rail joints with a straightedge each time you connect them.
Who uses plunge saw accessories?Kitchen fitters, joiners and carpenters, shopfitters, flooring installers and keen DIYers who cut a lot of sheet material all rely on them for straight, clean cuts.
See the full power tool accessories range, or browse saw stands to support long boards while you work.