Independent UK tool guide · Prices checked daily · Checkout and delivery by Amazon UK
UK Tool Store
Buying guides Price drops About

Hex Keys

Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.

Price drops Buying guides Bare tool vs kit Battery guide

Showing 61–80 of 96 results

Choosing the right hex keys
Hex keys are some of the cheapest tools you will ever buy and some of the most used. They turn the hexagonal socket screws found in flat pack furniture, bikes, door handles, taps, machinery guards, power tool blades and car trim. A good hex key set fits snugly, does not round off the screw and lasts for years, while a poor one can chew up a fastener in seconds.
Are hex keys the same as Allen keys?
Yes. Allen is a trade name that stuck, in the same way people say Hoover for a vacuum. You will also see them called hexagon keys, hex wrenches or L-keys. They all describe the same tool: a hexagonal bar, usually bent into an L shape, that fits a hex socket screw.
Types of hex key
Standard L-keys have a short arm and a long arm. Use the long arm in the socket for reach and speed, or flip it round and use the short arm in the screw for extra leverage when cracking a tight fastener loose.
Long arm and extra long keys reach screws buried deep in machinery, bike frames or cabinets, and give more leverage.
Ball-end hex keys have a rounded tip on the long arm that lets you turn the screw at an angle of up to around 25 degrees. A ball-end hex key is handy where you cannot get straight on to the screw, but use the square end for final tightening, as the ball tip is weaker and can snap under heavy load.
T-handle keys are easier on the hand and quicker to spin, which suits workshop and assembly work where you are turning lots of screws.
Folding hex keys keep all the sizes in one pocket sized holder, much like a penknife. Folding sets are popular with cyclists and anyone who needs a few sizes on the move, though they can be awkward in tight spaces.
Hex bits and hex sockets fit a driver, ratchet or impact driver for faster work and more torque. A hex bit in a cordless driver is a big time saver on flat pack jobs.
Metric or imperial?
Most furniture, bikes and European machinery use metric sizes, and a metric hex key set from 1.5 to 10mm covers the vast majority of jobs around the home. The 4mm, 5mm and 6mm keys are the ones you will use most. Older British and American machinery, some classic cars and certain US made products use imperial sizes, so if you work on those, look for an imperial hex key set or a combined metric and imperial kit. Never force a near miss size, such as a 3/16 inch key in a 5mm screw. It may feel close, but it will round the socket.
Quality and what to look for

Material: chrome vanadium and S2 are common. Higher grade keys are made to tighter tolerances, so they sit deeper and grip better.
Accurate sizing: a snug fit with no wobble is what stops screws rounding.
Holder: a clip or rack keeps the set together and makes the right size easy to find. Colour coded keys, like some Wera sets, speed this up further.
Size range: a 9 piece metric set from 1.5mm to 10mm suits most homes, while trades often add a long arm set and a T-handle set.

Brands such as Wera, Bondhus, Draper, Faithfull and Stanley offer everything from budget sets for the kitchen drawer to professional kits.
Hex key tips
Clean paint or dirt out of the socket before inserting the key, push it fully home and keep it square. If a screw is very tight, use the short arm for leverage rather than adding a pipe extension. Replace a key once its corners are worn, as a tired key is the main cause of rounded screws. For more general advice, see our hand tools buying guide, and our hand tool sets often include a hex key set alongside other basics.
Hex keys FAQs
What can I use instead of a hex key? In a pinch, a hex bit in a driver, a Torx bit of a similar size tapped in gently, or a flat blade wedged across the corners can work, but all risk damaging the screw. It is far better to buy the right size.
Is a hex key the same as a Torx key? No. A hex key has six flat sides, while Torx has a six point star shape that grips better and handles more torque. They are not interchangeable, and many sets now include both hex and Torx keys.
What are the different types of hex keys? The main types are standard L-keys, long arm keys, ball-end keys, T-handle keys, folding sets and hex bits for drivers.
Browse the full hand tools range for drivers, spanners and other fastening tools.