Diamond Cores
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Silverline 868562 Diamond Core Drill Bit 22 x 300 mm
Original price was: £25.58.£24.33Current price is: £24.33. -
Silverline Diamond Core Drill 32 x 150mm 675082
£33.59 -
sourcingmap 6mm 1/4" Diameter Ceramic Tile Glass Metal Hole Saw Diamond Core Drill Bit
£6.49 -
Starrett Diamond Dri-Core Drills – BMC152 Dry Cutting Core Drill – For Brick Blocks Granite Masonry – 152 mm
£62.99 -
Starrett Dry-Cutting Diamond Core Drills
£57.09 -
Tile Hole Saw, EVERMARKET 15 Pcs Diamond Holesaw Drill Bit Extractor Remover Tools for Glass, Porcelain, Ceramic, Granite Stone Drill Bits 6-50mm
£9.36 -
TIMCO Dry Diamond Core Drill Kit – 5pcs – Five of The Most Popular Sizes and Accessories in an Aluminium case
£101.10 -
UK Drills Diamond Core Drill Bit Set – 11 Pieces, Laser Welded – To Be Used in Granite, Concrete & Masonry
£94.99 -
Yuecoom Hole Drill Bit, Diamond Hole Saw, 35mm 45mm 55mm Drill Cores Bit for Porcelain Marble Glass Granite Tile
£10.79 -
ZFYQ Hole Saw Drill Bits Set, Diamond Drill Bit Set Cutting for Glass, Ceramic, Porcelain, Tile, Marble, Ø6mm-50mm, 15 Pcs
£12.99
Choosing diamond core bits for brick, tile and stone
Diamond core bits grind a clean hole through hard materials, which makes them the go-to choice for waste pipes, extractor vents and cable entries. The right one depends on the material, the hole size and the machine you own, so check the product description for what each one is rated for.
Wet or dry cutting
Dry versions suit brick, block and general masonry. Laser welded diamond segments with gaps help clear debris and stop the crown overheating, and you run them in an electric drill or rotary machine with the hammer action off. Wet diamond core drilling uses a water feed to cool the segments, and it is faster in reinforced concrete and hard stone, but it needs a proper rig, a steady supply of water and an RCD on any electric machine.
Matching the crown to the material
Abrasive masonry such as soft brick needs a harder bond, while porcelain, granite and engineering brick need a softer bond that keeps exposing fresh diamond. Turbo or segmented crowns suit masonry, and continuous rim crowns give a cleaner edge on tile and glass. Each brand grades its bonds a little differently, so read the product description and match the segments to the job.
Sizes and adaptors
Popular sizes include 28mm and 32mm for cables, 52mm and 65mm for waste pipes and 107mm to 152mm for vents. Small ones often use a hex or SDS shank, while larger ones use an M14 or 1/2 inch BSP thread, so you may need additional adaptors, a pilot guide or other additional accessories to suit your machine.
Getting a clean cut
Start with a pilot guide, keep the speed lower on larger sizes and cut from both sides on deeper holes so the face does not blow out. Wear eye protection and a mask rated for silica, as cutting masonry creates harmful dust. The HSE has guidance on controlling construction dust.
Diamond core bits FAQs
Can I use one in an SDS drill? Many dry versions fit an SDS adaptor, but switch hammer mode off, as impact damages the segments.
Do I need high power core drills? For holes above about 107mm, yes. Smaller sizes work in various standard machines and are perfect for occasional plumbing and electrical jobs. For timber and plastic, see our hole saws or the wider power tool accessories range.









