Independent UK tool guide · Prices checked daily · Checkout and delivery by Amazon UK
UK Tool Store
Buying guides Price drops About

Demolition Breakers

Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.

Price drops Buying guides Bare tool vs kit Battery guide

Showing 61–64 of 64 results

Demolition hammer buying guide: what to know before you choose
Lifting a patio, knocking out a chimney breast or digging out an old slab is hard, slow work by hand. The right tool turns a weekend of graft into a morning. This short demolition hammer buying guide covers the key specs, the type of work each size suits and what is worth paying extra for.
Match the tool to the type of work
Start with the job, not the wattage figure. Choosing too small a tool means it bounces off the surface, while one that is too large is tiring to hold and hard to control indoors.

Light SDS Plus models (around 2 to 6 joules): removing tiles, render and plaster, chasing walls for cable and light masonry jobs. Many double up as a rotary hammer drill.
SDS Max machines (roughly 8 to 20 joules): breaking out brick, block walls and thinner floor slabs. A good all-round choice for builders.
Large hex-shank units (25 joules and up): designed for thick floors, footings and road surfaces, usually used standing with the tool pointing down.

Impact force, weight and speed
Impact force, given in joules, is the most important number. It tells you how hard each blow lands, and it matters more than motor power. Blows per minute affect speed, but a fast, weak tool will not get through hard material quickly. Weight works with you on floors, since the tool does more of the work, but it works against you on walls and overhead. As a rule, keep anything over 10kg for downward breaking.
Some makers quote impact force using different test methods, so treat budget figures with caution. Premium brands such as Bosch, Makita, DeWalt and Hilti tend to quote EPTA figures, which are easier to compare like for like.
Corded, cordless or petrol
Corded tools give the most power for the price and run all day. Cordless models on 18V or 36V battery platforms are improving fast and are handy where there is no supply, but they suit lighter jobs and you will want two or more batteries. Petrol breakers are useful on remote sites, though they are louder, heavier and need fuel and servicing. On UK trade sites you may need 110V equipment, so check before you buy.
Vibration control and safety
Prolonged use of these tools can cause hand-arm vibration syndrome, so anti-vibration handles and dampened housings are well worth having. The HSE guidance on hand-arm vibration explains exposure limits and how to manage them. Always wear eye protection, hearing protection, gloves and a dust mask rated for silica, and let the tool’s weight do the work rather than leaning on it.
Bits and accessories
Most tools come with a point and a flat chisel. A wide tile chisel, a clay spade and a scaling bit make light work of specific materials. Match the shank type (SDS Plus, SDS Max or hex) to your tool, and keep points sharp, since a blunt bit wastes energy and adds vibration.
Demolition hammers FAQs
When to choose a cordless and when to choose a corded one? Choose cordless for short jobs, working at height or where there is no power. Choose corded for long sessions and the toughest materials.
What is the difference between a hammer drill and a demolition hammer? A hammer drill rotates and taps to make holes. A dedicated breaker only hammers, with far more impact force, for chiselling and breaking out.
Is a cordless hammer drill suitable for concrete? For drilling holes, yes. For breaking up a slab, you need proper breaking equipment with much higher energy per blow.
For drilling jobs, browse our drills range, read how to choose drill bits for every material, or head back to all power tools.