Cordless Drywall Cutters
Compared on price, power and value, with prices checked daily against Amazon UK. Not sure where to start? Our buying advice is further down the page.
-
Makita DCO181Z 18V Li-ion LXT Brushless Drywall Cutter – Batteries and Charger Not Included
£177.99 -
Makita DFS452Z 18V Li-Ion LXT Brushless Drywall Screwdriver – Batteries and Charger Not Included Large,Blue
Original price was: £182.99.£175.01Current price is: £175.01. -
Makita DSD180Z 18V Li-Ion LXT Drywall Cutter – Batteries and Charger Not Included, Blue
£173.99 -
Makita SD100DZ 12V Max Li-Ion CXT Drywall Cutter – Batteries and Charger Not Included
£167.99 -
MAXXT Drywall Cutting Tool, Brushless Cordless Plasterboard Cutter
£59.99 -
Metabo HPT 18V MultiVolt™ Cordless Drywall Cut-Out Tool | Tool Only – No Battery | Brushless Motor | 28,000 RPM | 1/8-Inch & 1/4-Inch Collets | M18DYAQ4
£132.16 -
Milwaukee 2627-20 M18 18-Volt Lithium-Ion Cordless Cut Out Tool Bare Tool
£98.88 -
Ryobi PSBCS02 ONE+ HP 18V Brushless Cordless Compact Light Weight Cut-Off Tool (Tool Only, Battery Not Included)
£119.95 -
TALOEYH – Cordless Drywall Cut-Out Tool Compatible with Ma-ki-ta 18V Battery, 3 Speed Adjustable Brushless Rotary Saw with Up to 26000 RPM, Drywall Rotary Tool with LED Light, for Cutting Wood Drywall
£51.99
How to cut plasterboard with a drywall cutter
This guide explains how to cut plasterboard accurately with a few simple tools, and when a battery drywall cutter is worth the money. These rotary machines spin a small spiral bit at high speed to create clean openings for sockets, downlights and pipes once boards are fixed in place.
How to cut plasterboard by hand
Good preparation saves time. Measure the space, then measure the board, and mark the line in pencil. Set a straightedge or long level on the line, score the ivory face with a sharp blade, snap the board and slice through the paper on the grey side. Measure again before fixing, and rasp the edges smooth. Using a guide rail or long level will improve straight cuts, and a fine saw blade on a padsaw helps with notches. A flat bench or table makes the following steps easier.
Openings for sockets and lights
A rotary cutter makes box openings in seconds. Measure from a fixed edge, mark the outline, plunge the bit in and guide it round. Choose a model with depth adjustment matched to the board thickness, a dust shroud and additional bits for various interior materials, including wood, plastic and thin ply. Each blade or bit wears with use, so keep spares.
Choosing a battery model
Buy for the platform you already own. Bosch GCU 18V-30, DeWalt DCE555 and Makita SD100D are well known, and many budget models take Makita or DeWalt packs. For a dry lining or construction user with experience of fitting boards, the time saved soon pays back, while a DIY user working on one room may not need one. Secure the board and wear a dust mask, as gypsum dust is fine and gets everywhere.
Drywall cutter FAQs
What is plasterboard made of? A gypsum core between two sheets of heavy paper.
Do you need an air gap for insulated plasterboard? It depends on the product and wall type, so follow the maker’s fixing information, as each board requires its own method.
Which side of plasterboard faces out? The ivory face goes out, and the grey side goes to the studs or wall.
Offcuts can go for gypsum recycling at many tips. See our tool kit guide or browse all tools.








